Shenzhen Pride Instrument Inc.
Purpose, Responsibility, Innovation and Devotion.
Add to Cart
LCD with EL backlight mm and inch Measuring display Ultrasonic Thickness Gauge
Model No: UTG-150/UTG-151
Functions:
· Display:4.5 digits LCD with EL backlight.
· Measuring display mm/inch selectable
· Measuring Range:0.75～300mm (in Steel).
· Sound Velocity Range: 1000~9999 m/s.
· Resolution:UTG-150: 0.1mm/0.01inch;
· UTG-151: 0.1/0.01mm,0.01/0.001inch
· Accuracy: ±(0.5%Thickness+0.04)mm, depends on materials and conditions
· Four measurements readings per second for single point measurement, and ten per second for Scan Mode.
· Memory for up to 20 files (up to 99 values for each file) of stored values.
· Power Source:Two “AA” size, 1.5 Volt alkaline batteries. 100 hours typical operating time (EL backlight off).
· Communication:RS232 serial port for UTG-151. No communication port for UTG-150.
· Outline dimensions:150×74×32 mm.
· Weight:245g
Transducer Selection:
| Model |
Freq MHZ |
Diam mm |
Measuring Range | Lower limit | Description |
| N02 | 2 | 22 |
3.0mm～300.0mm (In Steel) 40mm (in Gray Cast Iron HT200) |
20 | for thick, highly attenuating, or highly scattering materials |
| N05 | 5 | 10 |
1.2mm～230.0mm (In Steel) |
Φ20mm×3.0mm | Normal Measurement |
|
N05 /90° |
5 | 10 |
1.2mm～230.0mm (In Steel) |
Φ20mm×3.0mm | Normal Measurement |
| N07 | 7 | 6 |
0.75mm～80.0mm (In Steel) |
Φ15mm×2.0mm | For thin pipe wall or small curvature pipe wall measurement |
| HT5 | 5 | 14 | 3～200mm (In Steel) | 30 | For high temperature (lower than 300℃) measurement. |
Standard Delivery:
| No. | Item | Quantity | Note |
| 1 | Main body | 1 | |
| 2 | Transducer | 1 | Model: N05/90° |
| 3 | Coupling oil | 1 |
|
| 4 | Instrument Case | 1 |
|
| 5 | Operating Manual | 1 |
|
| 6 | Alkaline battery | 2 | AA size |
Optional
| 7 | Transducer: N02 | |
| 8 | Transducer: N07 | |
| 9 | Transducer: HT5 | |
| 10 | Mini thermal printer |
Only for UTG-151 |