Shenzhen Pride Instrument Inc.
Purpose, Responsibility, Innovation and Devotion.
Add to Cart
Digital foam hardness tester PDT-817 durometer hard test meter SHORE F hardness tester for Sponge Soft Cellular Materials Testing
Durometer Type F is an exclusive design for testing soft cellular materials. The large diameter presser foot and cylindrical indentor configuration allow measurement by direct application to the test specimen.
SPECIFICATIONS:
Display:4 digits, 10 mm LCD
Range:0~100
Resolution: 0.1
Presser foot: 80mm diameter
Indenter: Extension 2.54mm
25.2mm Cylinder
Spring force: 455gf
Measurement deviation: ≤ ±1
Power supply: 4x1.5v AA (UM-3) battery
Operating condition: Temp. 0~50℃
Humidity <80%
Size:162x65x28mm (6.4x2.6x1.1inch)
Weight:about 490g(not including batteries)
PC interface: RS232C interface
Power off : 2 modes
Manual off at any time by depressing the power key till OFF shows on the display or Auto power off after 2 minutes from last key operation .
| Display | 4 digits, 10 mm LCD |
| Range | 0~100 |
| Resolution | 0.1 |
| Presser foot | 80mm diameter |
| Indenter | Extension 2.54mm |
| Cylinder | 25.2mm |
| Spring force | 455gf |
| Measurement deviation | ≤ ±1 |
| Power supply | 4x1.5v AA (UM-3) battery |
| Operating condition | Temp. 0~50℃ |
| Humidity <80% | |
| Size | 162x65x28mm (6.4x2.6x1.1inch) |
| Weight: | about 490g(not including batteries) |
| PC interface | RS232C interface |
| Power off | 2 modes |